(Note: If you are installing wrap-style grips, Read the important instructions below the video)
IMPORTANT: All Winn Grips require special care when installing. Make sure to note these 3 points:
#1) All Winn Grips can only be installed with tape & solvent. You cannot use an air compressor to install them, as they will likely be damaged.
#2) If using pre-cut tape strips, remember to remove the wax paper from BOTH sides of the tape
#3) Use plenty of solvent to lubricate the grip and shaft
#4) Slide the grip on straight. If the grips are bent during installation, they may come apart.
If you have any questions, please
contact us here
LEARN MORE:
EVERYTHING YOU NEED TO KNOW for RE-GRIPPING YOUR CLUBS
Including required tools & supplies.
Including required tools & supplies.